BOSS DD-500

Introduction

Full Stereo

The DD-500 has a dual delay engine, meaning that you can have two delays running at the same time. This means that if you record in stereo, you can have one delay in one channel and another delay in the other channel. In order to set this up, you need to make some adjustments on the DD-500.

• Under system settings you need to change OUTPUT to STEREO and FSW MODE to A/B/SIMUL.
• Under Bank you need to set CONNECTION to Parallel, OUTPUT MODE to A/B, and D.LEVEL ADJUST to 100%.

If you use OUTPUT MODE MIX, to blend the delays together in both channels, then you need to set D.LEVEL ADJUST to 50%, otherwise the volume will be “doubled”.